Supermicro AS-2114GT-DNR 2U 2-Node Rack Server — Single AMD EPYC 7742 64-Core (128 Threads) per Node, 6x PCIe Gen4 Slots + 1x OCP 3.0 per Node, 16x DDR4 DIMM Slots, 4-Bay 2.5" NVMe, 2x E810-XXV Dual-Port 25Gb SFP28 — CPU Only Refurbished
Every unit is diagnostic-tested and verified healthy before shipment. Learn about our full testing process ↓
Intel E810-XXV 25Gb networking identifies this Supermicro AS-2114GT-DNR configuration. The system contains two independent nodes in a 2U chassis, each with a single AMD EPYC 7742 processor, 64-Core (128 Threads), for 2 processors total. Each node includes one dual-port 25G SFP28 add-in adapter and a dedicated management port. The chassis provides sixteen DDR4 DIMM slots (eight per node) and, per node, six PCIe Gen4 x16 slots (four internal, one full-height half-length, and one full-height full-length) plus an OCP 3.0 slot. It has four 2.5-inch hot-swap NVMe bays (two per node), plus two M.2 sockets per node. The installed add-in card occupies one expansion slot per node, so available expansion capacity depends on the current configuration. The platform supports GPUs, but none are included. Power is supplied by two 2600W units in a 1+1 redundant arrangement. Sold as CPU only — no memory, drives, or GPUs included. Ships with power cables, all 4 drive carriers, and inner rails only; outer rail kit not included.
| Type | Server |
|---|---|
| Brand | Supermicro |
| Series | AS-2114GT |
| Model Number | AS-2114GT-DNR |
| Form Factor | 2U Rackmount |
| CPU | 2x AMD EPYC 7742 64-Core (128 Threads), 2nd Gen (1 per Node) |
| RAM Slots | No RAM Installed (16x DDR4 DIMM, 8 per Node, Up to 2TB per Node, 3200 MT/s) |
| Expansion Slots | Per Node: 6x PCIe Gen4 x16 (4x Internal, 1x FHHL, 1x FHFL) + 1x OCP 3.0 |
| Management | IPMI 2.0 with KVM-over-LAN, dedicated port per Node |
| RAID/HBA | N/A -- no controller installed |
| Networking | 2x Dual-Port Intel E810-XXV 25G SFP28 (1 per Node) + 2x Dedicated Management Ports (1 per Node) |
| Power Supply | 2× 2600W 96% Efficiency (1+1) |
| Storage | 4× 2.5" NVMe Hot-Swap (2 per Node) + 4x M.2 Slots (2 per Node) |
Warranty
|
Condition - Seller Refurbished : 6 Months Seller Warranty
|
|
| Satisfaction Guarantee: Return for refund within 30 days of package reception date. | |
| This item is covered by serverpartdeals.com Return Policy | |
| To initiate a return please fill out the Return Form | |
| For frequently asked questions about warranties and returns please visit our FAQs |
Disclaimer
Some references may appear on this website or product descriptions to trademarks belonging to others not affiliated with ServerPartDeals.com (SPD), including references which may not display the ® symbol. All third-party trademarks (including logos and icons) referenced by SPD remain the property of their respective owners. Unless specifically identified as such, SPD’s use of third-party trademarks does not indicate any relationship, sponsorship, or endorsement between SPD and the owners of these trademarks. Any references by SPD to third party trademarks is to identify the corresponding third-party goods and/or services and shall be considered nominative fair use under trademark law.Warning
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
This animation is a visual aid only and does not represent the actual testing methodology, sequence, or results for this drive.
We test every server before you do.
Every server Server Part Deals sells passes an internal 4-stage testing protocol before it ships. While many resellers stop at a basic power-on check, we validate installed hardware, firmware, system performance, thermals, and stability under sustained load. Each server is tested to confirm that it meets or exceeds its listed specifications.
Stage 1: Physical Inspection
- Chassis and structural inspection
- Port, connector, and backplane check
- Fan, heatsink, and airflow inspection
- Shipping-damage and component-security check
Stage 2: Hardware & Firmware Validation
- CPU, RAM, and storage verification
- BIOS and firmware validation
- RAID and controller detection
- Remote-management interface check
Stage 3: Performance Testing
- Processor and memory benchmarking
- Storage and network throughput testing
- Multi-component load simulation
- Power and thermal-performance validation
Stage 4: Stability & System Testing
- Extended burn-in testing
- Hardware-error and event-log review
- Fan, temperature, and power monitoring
- Final boot and configuration verification