Supermicro AS-1114S-WN10RT 1U Rack Server — Single AMD EPYC 7402 24-Core/48-Thread, 3x PCIe Gen4 Slots, 16x DDR4 DIMM Slots, 10-Bay 2.5" SATA/NVMe, 2x 10GbE + Intel E810-XXV Dual-Port 25G SFP28, 1+1 750W Redundant — CPU Only Refurbished
Every unit is diagnostic-tested and verified healthy before shipment. Learn about our full testing process ↓
The Supermicro AS-1114S-WN10RT is a 1U single-socket rackmount server built for virtualization, cloud computing, and all-flash storage applications. This unit is configured with one AMD EPYC 7402 processor, 24-Core (48 Threads), and 10 front hot-swap 2.5" bays supporting NVMe or SATA devices. No add-on HBA or RAID controller is installed, and SAS drive support requires optional parts that are not included. It has 16 DDR4 DIMM slots and three PCIe Gen4 ×16 expansion slots (two full-height half-length and one low-profile). Networking is 2× 10GbE RJ45 plus a dedicated management port, with a dual-port Intel E810-XXV 25G SFP28 adapter installed in an expansion slot. Power is supplied by two 750W units in a redundant configuration. Sold as CPU only — no memory or drives included. Ships with power cables, all 10 drive carriers, and inner rails only; outer rail kit not included.
| Type | Server |
|---|---|
| Brand | Supermicro |
| Series | AS-1114S |
| Model Number | AS-1114S-WN10RT |
| Form Factor | 1U Rackmount |
| CPU | 1x AMD EPYC 7402 24-Core (48 Threads), 2nd Gen |
| RAM | No RAM Installed (16x DDR4 DIMM, Up to 4TB, 3200 MT/s) |
| Expansion Slots | 3x PCIe Gen4 ×16 (2x FHHL, 1x LP) |
| RAID/HBA | N/A — no controller installed; SAS requires optional parts |
| Networking | 2× 10GbE RJ45 + 1x Dual-Port Intel E810-XXV 25G SFP28 + 1x Dedicated Management Port |
| Power Supply | 2× 750W (1+1 Redundant) |
| Storage | 10× 2.5" Front Hot-Swap NVMe/SATA |
Warranty
|
Condition - Seller Refurbished : 6 Months Seller Warranty
|
|
| Satisfaction Guarantee: Return for refund within 30 days of package reception date. | |
| This item is covered by serverpartdeals.com Return Policy | |
| To initiate a return please fill out the Return Form | |
| For frequently asked questions about warranties and returns please visit our FAQs |
Disclaimer
Some references may appear on this website or product descriptions to trademarks belonging to others not affiliated with ServerPartDeals.com (SPD), including references which may not display the ® symbol. All third-party trademarks (including logos and icons) referenced by SPD remain the property of their respective owners. Unless specifically identified as such, SPD’s use of third-party trademarks does not indicate any relationship, sponsorship, or endorsement between SPD and the owners of these trademarks. Any references by SPD to third party trademarks is to identify the corresponding third-party goods and/or services and shall be considered nominative fair use under trademark law.Warning
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
This animation is a visual aid only and does not represent the actual testing methodology, sequence, or results for this drive.
We test every server before you do.
Every server Server Part Deals sells passes an internal 4-stage testing protocol before it ships. While many resellers stop at a basic power-on check, we validate installed hardware, firmware, system performance, thermals, and stability under sustained load. Each server is tested to confirm that it meets or exceeds its listed specifications.
Stage 1: Physical Inspection
- Chassis and structural inspection
- Port, connector, and backplane check
- Fan, heatsink, and airflow inspection
- Shipping-damage and component-security check
Stage 2: Hardware & Firmware Validation
- CPU, RAM, and storage verification
- BIOS and firmware validation
- RAID and controller detection
- Remote-management interface check
Stage 3: Performance Testing
- Processor and memory benchmarking
- Storage and network throughput testing
- Multi-component load simulation
- Power and thermal-performance validation
Stage 4: Stability & System Testing
- Extended burn-in testing
- Hardware-error and event-log review
- Fan, temperature, and power monitoring
- Final boot and configuration verification