Seagate OneStor SP-2584-ISA 84-Bay 5U iSCSI Storage Array Enclosure Only, No Front Face
Every unit is diagnostic-tested and verified healthy before shipment. Learn about our full testing process ↓
Seagate OneStor SP-2584-ISA 84-Bay 5U iSCSI Storage Array Enclosure Only, No Front Face
The Seagate OneStor 5U84 (SP-2584-ISA) is a high-density iSCSI storage array built on Seagate’s 25-series platform. This unit is sold as an enclosure only — no drives are included, and the front face is not present.
Highlights
- 84 Bays in 5U: The OneStor 5U84 chassis carries 84 drive bays in a 5-rack-unit form factor.
- iSCSI, Not Fibre Channel: Fitted with dual 1104555-02 controller modules and configured for 10GbE iSCSI. The controller is what separates the ISA from the Fibre Channel variants of the same chassis.
- Management: DeepStor
- Identification: Regulatory Model Number SP-2584-ISA-01, chassis part number 1016437-07. The unit reports SCSI Product ID SP-358444X6 on SES/SCSI inquiry — that’s the code a host will display rather than the model name.
-
Condition: The front face is not present on this unit. Drive carriers are included. No drives are included.
Note: Many configurations available, contact us via email or call us for custom options
Datasheet: Seagate OneStorSpecifications
| Brand |
Seagate |
| Series |
OneStor |
| Model Number |
SP-2584-ISA-01 |
| SCSI Product ID |
SP-358444X6 |
| Chassis Part Number |
1016437-07 |
| Controller Module FRU |
1104555-02 |
| Form Factor |
5U rackmount |
| Drive Bays | 84 |
| Interface Protocols | iSCSI |
| Host Interface | 10GbE |
Disclaimer
Some references may appear on this website or product descriptions to trademarks belonging to others not affiliated with ServerPartDeals.com (SPD), including references which may not display the ® symbol. All third-party trademarks (including logos and icons) referenced by SPD remain the property of their respective owners. Unless specifically identified as such, SPD’s use of third-party trademarks does not indicate any relationship, sponsorship, or endorsement between SPD and the owners of these trademarks. Any references by SPD to third party trademarks is to identify the corresponding third-party goods and/or services and shall be considered nominative fair use under trademark law.Warning
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
This animation is a visual aid only and does not represent the actual testing methodology, sequence, or results for this drive.
We test every JBOD enclosure before you do.
Every JBOD enclosure Server Part Deals sells passes an internal 4-stage testing protocol before it ships. While many resellers stop at a basic power-on check, we validate every drive bay, backplane connection, SAS expander, power supply, and cooling component. Each enclosure is tested under sustained operation to confirm reliable connectivity, airflow, and system stability.
Stage 1: Physical Inspection
- Chassis and structural inspection
- Drive-bay and caddy alignment check
- SAS, power, and management-port inspection
- Fan, power-supply, and cable inspection
Stage 2: Hardware Validation
- Backplane and SAS expander detection
- Drive-bay connectivity verification
- Power-supply and fan-status review
- Firmware and enclosure-ID validation
Stage 3: Throughput Testing
- Multi-drive read/write cycles
- SAS link-speed validation
- Concurrent bay-load testing
Stage 4: Stability & Bay Testing
- Full drive-bay population scan
- Link-error and disconnect monitoring
- Temperature and airflow verification
- Final enclosure and inventory check