Gigabyte R282-Z93 2U GPU Server — Dual AMD EPYC 7H12 64-Core (128 Total), 3x PCIe Gen4 x16 Slots, 32x DDR4 DIMM Slots, 12-Bay 3.5", 2x BCM57414 10Gb/25Gb, 2x SAS39xx — CPU Only Refurbished
Gigabyte R282-Z93 2U GPU Server — Dual AMD EPYC 7H12 64-Core (128 Total), 3x PCIe Gen4 x16 Slots, 32x DDR4 DIMM Slots, 12-Bay 3.5", 2x BCM57414 10Gb/25Gb, 2x SAS39xx — CPU Only Refurbished
How We Test
Every unit is diagnostic-tested and verified healthy before shipment. Learn about our full testing process ↓
About this item
The Gigabyte R282-Z93 is a 2U rackmount GPU server built for AI training, inference, visual computing and high-performance computing workloads. This unit is configured with two AMD EPYC 7H12 processors, 64-Core each (128 Total), two Broadcom BCM57414 NetXtreme-E 10Gb/25Gb RDMA network adapters, and two Broadcom SAS39xx 12G SAS storage controllers. Onboard networking is 2x 1GbE via an Intel I350-AM2 controller plus a dedicated management LAN. The chassis provides 32 DDR4 DIMM slots across 8 channels per CPU at up to 3200 MT/s, twelve 3.5"/2.5" SATA/SAS hot-swap bays, three full-height full-length PCIe Gen4 x16 slots for GPUs, two full-height half-length PCIe Gen4 x16 slots, an OCP NIC 3.0 Gen4 x16 slot and an OCP 2.0 Gen3 x8 mezzanine slot. Installed add-in cards occupy some expansion slots, so available GPU capacity depends on the current configuration. Power is supplied by two 2000W 80 PLUS Platinum redundant units with 100-240V AC input. Sold as CPU only — no memory, GPUs, or drives included.
| Type | GPU Server |
|---|---|
| Brand | Gigabyte |
| Series | R282 |
| Model Number | R282-Z93 |
| Form Factor | 2U Rackmount |
| CPU |
2x AMD EPYC 7H12 64-Core (128 Total), Zen 2 |
| RAM Slots | DDR4 32 x DIMM |
| Expansion Slots | 5x PCIe Gen4 x16 (3x FHFL + 2x FHHL) + 1x OCP 3.0 Gen4 x16 + 1x OCP 2.0 Gen3 x8 |
| Networking | 2x 1GbE (Intel I350-AM2) + 1x Dedicated IPMI + 2x Broadcom BCM57414 10Gb/25Gb |
| Power Supply | 2× 2000W 80 Plus Platinum Redundant |
| Storage | 12× 3.5"/2.5" SATA/SAS Hot-Swap + 1× M.2 PCIe Gen3 x4 |
| Storage Controller | 2x Broadcom SAS39xx 12G SAS |
Warranty
|
Condition - Seller Refurbished : 6 Months Seller Warranty
|
|
| Satisfaction Guarantee: Return for refund within 30 days of package reception date. | |
| This item is covered by serverpartdeals.com Return Policy | |
| To initiate a return please fill out the Return Form | |
| For frequently asked questions about warranties and returns please visit our FAQs |
Disclaimer
Some references may appear on this website or product descriptions to trademarks belonging to others not affiliated with ServerPartDeals.com (SPD), including references which may not display the ® symbol. All third-party trademarks (including logos and icons) referenced by SPD remain the property of their respective owners. Unless specifically identified as such, SPD’s use of third-party trademarks does not indicate any relationship, sponsorship, or endorsement between SPD and the owners of these trademarks. Any references by SPD to third party trademarks is to identify the corresponding third-party goods and/or services and shall be considered nominative fair use under trademark law.Warning
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
This animation is a visual aid only and does not represent the actual testing methodology, sequence, or results for this drive.
We test every server before you do.
Every server Server Part Deals sells passes an internal 4-stage testing protocol before it ships. While many resellers stop at a basic power-on check, we validate installed hardware, firmware, system performance, thermals, and stability under sustained load. Each server is tested to confirm that it meets or exceeds its listed specifications.
Stage 1: Physical Inspection
- Chassis and structural inspection
- Port, connector, and backplane check
- Fan, heatsink, and airflow inspection
- Shipping-damage and component-security check
Stage 2: Hardware & Firmware Validation
- CPU, RAM, and storage verification
- BIOS and firmware validation
- RAID and controller detection
- Remote-management interface check
Stage 3: Performance Testing
- Processor and memory benchmarking
- Storage and network throughput testing
- Multi-component load simulation
- Power and thermal-performance validation
Stage 4: Stability & System Testing
- Extended burn-in testing
- Hardware-error and event-log review
- Fan, temperature, and power monitoring
- Final boot and configuration verification