Dell PowerEdge Refurbished R740xd 24x2.5" SAS/SATA/NVMe 2U Server
Every unit is diagnostic-tested and verified healthy before shipment. Learn about our full testing process ↓
PowerEdge Refurbished R740xd 24-bay SFF 2U Server
Condition: Seller Refurbished, fully tested, decommissioned, and reset to factory defaults
Choose between:
2x Xeon Silver 4216 CPUs, 8x 16GB DDR4, iDRAC9 Enterprise, Rail and Bezel included
or
2x Xeon Silver 4110 CPUs, 8x 8GB DDR4, iDRAC9 Enterprise, Rail and Bezel included
Note: Many configurations available, contact us via email or call us for custom options or deals on drives to populate the server.
Specs:
Dual Xeon CPUs, Scalable Silver series
All configs include NVMe expander kit to support up to 4 U.2 NVMe drives
Dual 1100w 80+ Platinum PSUs
H740p PERC
19" rack-mountable width
Depth of 73.75 cm (29.0 in) No SATA DOM SD card boot module included.
Disclaimer
Some references may appear on this website or product descriptions to trademarks belonging to others not affiliated with ServerPartDeals.com (SPD), including references which may not display the ® symbol. All third-party trademarks (including logos and icons) referenced by SPD remain the property of their respective owners. Unless specifically identified as such, SPD’s use of third-party trademarks does not indicate any relationship, sponsorship, or endorsement between SPD and the owners of these trademarks. Any references by SPD to third party trademarks is to identify the corresponding third-party goods and/or services and shall be considered nominative fair use under trademark law.Warning
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
This animation is a visual aid only and does not represent the actual testing methodology, sequence, or results for this drive.
We test every server before you do.
Every server Server Part Deals sells passes an internal 4-stage testing protocol before it ships. While many resellers stop at a basic power-on check, we validate installed hardware, firmware, system performance, thermals, and stability under sustained load. Each server is tested to confirm that it meets or exceeds its listed specifications.
Stage 1: Physical Inspection
- Chassis and structural inspection
- Port, connector, and backplane check
- Fan, heatsink, and airflow inspection
- Shipping-damage and component-security check
Stage 2: Hardware & Firmware Validation
- CPU, RAM, and storage verification
- BIOS and firmware validation
- RAID and controller detection
- Remote-management interface check
Stage 3: Performance Testing
- Processor and memory benchmarking
- Storage and network throughput testing
- Multi-component load simulation
- Power and thermal-performance validation
Stage 4: Stability & System Testing
- Extended burn-in testing
- Hardware-error and event-log review
- Fan, temperature, and power monitoring
- Final boot and configuration verification